|
|
|
(The following uses the operation of setting the check-in start time on the Add Timeshift interface as an example.)
(1) Click the setup box to the right of Check-in Start Time. Then, a time setup box as shown in the figure below is displayed.
(2) Click the hour box. The hour selection box is displayed, as shown in the figure below.
Click the time in the hour selection choice box to select an hour. (Note: You can enter an hour in the hour box manually.)
(3) Click the minute box. The minute selection box is displayed, as shown in the figure below.
Click the time in the minute selection box to select a minute. (Note: You can enter a minute in the minute box manually.)
(4) Click the second box. The second selection box is displayed, as shown in the figure below.
Click the time in the second selection box to select a second. (Note: You can enter a second in the second box manually.)
(5) After the completion of setting the hour, minute and second, click OK to save the settings.
Ct (Current): Click Ct to set the time to the current time.
Del (Delete): Click Del to clear the selected time if you want to re-select the time.
|
|